USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
USER MANUAL
15.2 Screen memories
Save a Screen memory
A Screen memory saves the selected Screen in the current settings.
Using Filters, select which Layers and Layer settings to save in the Screen memory. By default, all Layers and
all Layer settings are selected.
1. In Screens, click the Memories tab in the right panel.
2. Select Screen mode.
3. Click Save to open the Screen memory saving window:
Description / Setting selection
Select to save the current layers settings from
Program or Preview Screen.
Select the Screen to save
Select the layer settings to include/exclude from the
Master Memory.
Select the layer to include/exclude from the Master
Memory.
Select the Screen Memory slot to use.
Enter a label for the Screen Memory.
4. Select the settings to save in the Screen memory using the table above.
5. Click Save.
Load a Screen memory
1. In Screens, click the Memories tab in the right panel.
2. Select Screen mode and click Load.
3. If needed, enable Auto Scale to adapt the loaded memory to fit the Screen.
4. Click a layer in Program or Preview.
5. Click a Screen memory slot.
The Screen memory is loaded to the selected Screen in Program or Preview.
Tip: It is also possible to drag a memory slot to a Program or Preview Screen.
Edit a Screen memory
1. Load a Screen memory.
2. Click Save to open the Screen memory saving window.
3. Select the settings to save.
4. Select the existing Screen memory slot to edit.
5. Click Save to overwrite the previous Screen memory.