Operation
6.2.3 - Acquisition Mode: Photon Counting
Same as Acquisition Mode: Kinetic. Please refer to section 5.3.1.6 to set up the appropriate counting thresholds.
6.2.4 - Acquisition Mode: Fast Kinetics
Allows the user to acquire a short kinetics series with a rapid cycle time. The image is captured on a sub section of the
sensor array, with the remainder of the array being used as a storage area until the data series is readout. The user can
specify the exposure time for each frame within the series (in seconds), the size of the sub-section capturing the image
(in rows) and the binning pattern. The number in the series can also be entered but is limited to a maximum value equal
to the number of rows in the sensor array divided by the number of rows specied in the sub section.
To Next Page
Loading...