Section 9 Details on Device Messages
9-26
9.9 AUT [Auto Measure]
■ Function
Carries out auto measurement. The wavelength and resolution are automatically
set for the incident light spectrum.
When the measurement is complete, bit 0 (measurement end bit) of the extended
event status register (ESR2) is set to 1.
Header Program Query Response
AUT AUT AUT ? n
■ Value of n
n indicates a measurement state. 0 or 1 is output.
0: Measurement has been completed.
1: Measurement is being carried out.
9.10 AVS [Sweep Average]
■ Function
Sets the number of sweep operations for sweep averaging.
Header Program Query Response
AVS AVS n AVS ? n
■ Value of n
The unit is number of times. Input an integer comprising 1 to 3 digits or OFF.
Data range: 2 ≤ n ≤ 1000 , or OFF
■ Initial setting value
n is a backed up value.
■ Default
n = OFF
To Next Page
Loading...
