Anritsu MS9710C - TIME [Time Set]; TLSA [Measure Mode (Adjust to TLS)]

9-61
9.83 TIME [Time Set]
■ Function
Sets hours and minutes.
Header Program Query Response
TIME TIME hh,mi TIME ? hh,mi
■ • Value of hh
Input hours with two digits (00 to 23).
• Value of mi
Input minutes with two digits (00 to 59).
9.84 TLSA [Measure Mode (Adjust to TLS)]
■ Function
Calibrates wavelength of optical spectrum for TLS Tracking measurement
Setting/Reading are only possible in the TLS Tracking measurement mode.
Header Program Query Response
TLSA TLSA n TLSA ? m
■ Values of n and m
n indicates the following conditions.
n = 0: TLS wavelength calibration forcibly quit
= 1: Executing TLS wavelength calibration and finding TLS wavelength
calibration data
m indicates the following conditions.
m = 0: TLS wavelength calibration ended normally
= 1: Calibrating TLS wavelength
= 2: TLS wavelength calibration suspended due to abnormality
= 3: Not calibrated
9.84 TLSA [Measure Mode (Adjust to TLS)]