Anritsu MS9710C - FED [Feed]; FMT [FD Format]; FOPT [FD File Option]

Section 9 Details on Device Messages
9-42
9.40 FED [Feed]
■ Function
Causes the internal printer to feed lines.
Header Program Query Response
FED FED n None None
■ Value of n
n is a number of lined to be fed, 0 to 255.
9.41 FMT [FD Format]
■ Function
Formats the FD.
When formatting is complete, bit 2 (transfer end bit) of the extended event status
register (ESR2) is set to 1.
Header Program Query Response
FMT FMT None None
9.42 FOPT [FD File Option]
■ Function
Sets FD file options.
Header Program Query Response
FOPT FOPT a, b, c FOPT ? a, b, c
■ • Value of a
Specify an additional file to be saved.
a = NONE: None (No additional file)
= BMP: ∗bimp file output
= TXT: ∗txt (text) file output
= BMP&TXT: bimp and text file output
• Value of b
Specify a file ID.
b = NUMBER: File number input
= NAME: File name input
• Value of c
Specify an FDD mode. c may be omitted.
c = 1.44 M: PC-compatible machine
= 1.2 M: PC98 Series (NEC/EPSON)
Note:
c can be changed by turning off the power and then turning it on.