6-7
6.2.5 <RESPONSE MESSAGE UNIT>
<RESPONSE MESSAGE UNIT> is defined as follows:
<RESPONSE DATA>
Refer to 6.2.9
<RESPONSE
DATA SEPARATOR>
Refer to 6.2.7
<RESPONSE
HEADER SEPARATOR>
Refer to 6.2.6
<RESPONSE DATA>
Refer to 6.2.9
<RESPONSE
DATA SEPARATOR>
Refer to 6.2.7
<RESPONSE
HEADER>
Refer to 6.2.8
One is a response message unit with header, which returns the result of processing the program-message-set infor-
mation accurately. The other is a response message unit without header, which returns only the measurement result.
6.2.6 <RESPONSE HEADER SEPARATOR>
<RESPONSE HEADER SEPARATOR> is defined as follows:
SP
<RESPONSE HEADER SEPARATOR> is a space written after <RESPONSE HEADER> to be separated from
<RESPONSE DATA>.
The space SP corresponds to ASCII code byte 20 (decimal 32).
In a response message with header, a space must always exist between the header and the data as a response header
separator. It indicates the end of the header and the beginning of response data at the same time.
6.2 Response Message Functional Elements
To Next Page
Loading...
Need help?
General
