Anritsu MS9710C - Response Data

Section 6 Talker Output Format
6-10
6.2.9 <RESPONSE DATA>
There are 11 types of <RESPONSE DATA> elements. Among them, the MS9710C transfers the response data shown
in the hollow squares surrounded by a shade. The response data to be returned depends on the query message.
<CHARACTER
RESPONSE DATA>
<NR1 NUMERIC
RESPONSE DATA>
<NR2 NUMERIC
RESPONSE DATA>
<NR3 NUMERIC
RESPONSE DATA>
<HEXADECIMAL
NUMERIC RESPONSE DATA>
<OCTAL NUMERIC
RESPONSE DATA>
<BINARY NUMERIC
RESPONSE DATA>
<STRING
RESPONSE DATA>
<DEFINITE LENGTH
ARBITRARY BLOCK RESPONSE DATA>
<INDEFINITE LENGTH
ARBITRARY BLOCK RESPONSE DATA>
†1
<ARBITRARY ASCII
RESPONSE DATA>
†1
Refer to (1) of 6.2.9
Refer to (2) of 6.2.9
Refer to (3) of 6.2.9
Refer to (4) of 6.2.9
Refer to (5) of 6.2.9
Refer to (6) of 6.2.9
Refer to (7) of 6.2.9
Refer to (8) of 6.2.9
Refer to (9) of 6.2.9
Refer to (10) of 6.2.9
Refer to (11) of 6.2.9
† 1:
<INDEFINITE LENGTH ARBITRARY BLOCK RESPONSE
DATA> and <ARBITRARY ASCII RESPONSE DATA> is terminated
with NL ^ END after the last byte has been transferred.