Anritsu MS9710C - DRG [Dynamicrange Mode]; EMK [Marker Off]; ERR [Error]

9-39
9.31 DRG [Dynamicrange Mode]
■ Function
Sets a high or normal dynamic range.
Header Program Query Response
DRG DRG s DRG ? s
■ Value of s
s indicates a selected dynamic range.
High dynamic range .................. HIGH
Normal dynamic range .............. NORMAL
■ Initial setting value
s is a backed up value.
■ Default
s = NORMAL
9.32 EMK [Marker Off]
■ Function
Deletes all markers
Header Program Query Response
EMK EMK None None
9.33 ERR [Error]
■ Function
Reads the number of the error occurred during GPIB operation.
Header Program Query Response
ERR None ERR ? n
■ Value of n
n indicates an error code number, a 3-digit integer.
An error number is set when the ESB bit (bit 5) of the status byte register (STB) is
on and the command error bit (bit 5), execution error bit (bit 4), or device depen-
dent error bit (bit 3) of the standard event status register (ESR) is on.
9.33 ERR [Error]