A-5
Appendix A
Appendix
A.4 Device Errors (300 to 499)
300
301
302
303
304
305
306
320
321
322
323
324
400
401
402
403
404
405
406
407
408
to
419
420
421
No.
ESE-DDE
ESE-DDE
ESE-DDE
ESE-DDE
ESE-DDE
ESE-DDE
ESE-DDE
ESE-DDE
ESE-DDE
ESE-DDE
ESE-DDE
ESE-DDE
ESE-CME
ESE-CME
ESE-CME
ESE-CME
ESE-CME
ESE-CME
ESE-CME
–
–
Status
– Errors related to FD –
FD Does Not Exist
FD Format Error
Can't Find File
FD Memory Full
FD Write Protected
File Incomplete
Data File Full
– Errors related to printer –
No paper
Lever Off
Printer Error
Printer Error
Printer Error
– Errors related to GPIB/RS-232C
Reserved
Command Error
Command Error
Command Error
Command Error
Command Error
Command Error
Command Error
No used
TLS Interface Error
TLS Not Respond
Error message
An FD has not been set.
The FD format is invalid.
The specified file does not exist on the FD.
Too many memory for the FD.
The FD is write-protected.
Files on the FD are incomplete.
Too many files for the FD
End of paper
The paper hold level is released.
No printer is connected or the printer
device type is invalid.
The thermistor connector is not connected.
Abnormal head temperature
An undefined header has been received.
The integer part of the numeric data is
invalid.
The real part of the numeric data is
invalid, or invalid
The integer part of the numeric data is
invalid, or invalid exponent-type data
has been input.
The suffix part (unit) is invalid.
The number of arguments does not
follow command syntax.
A ∗PCB command was received but
there is no controller function for this
command.
Abnormality in connecting with TLS.
No response from TLS.
Output condition
A.4 Device Errors (300-499)
To Next Page
Loading...
