Anritsu MS9710C - GCL [Graph Clear]; HEAD [Header]; ITM [Interval Time]

9-43
9.45 ITM [Interval Time]
9.43 GCL [Graph Clear]
■ Function
Clears the waveform.
Header Program Query Response
GCL GCL None None
9.44 HEAD [Header]
■ Function
Determines whether a header is to be added to the data replied to a query command.
Header Program Query Response
HEAD HEAD s None None
■ s Value of
s = ON: Add a header.
= OFF:Do not add a header.
■ Initial setting value
s = OFF
9.45 ITM [Interval Time]
■ Function
Sets a sweep start interval.
Header Program Query Response
ITM ITM s ITM ? s
■ Value of s
s is an interval time. Input a unit and a value (S’ = 0 to 99), or input a value with
its unit fixed at sec. (When the value is greater than 99 sec, it is displayed in min.)
Unit ......................... MIN, SEC
Data range .............. 0 sec ≤ s’ ≤ 99 min
■ Initial setting value
s is a backed up value.
■ Default
s = “0 SEC”