9-27
9.11 AVT [Point Average]
■ Function
Sets the number of points for point averaging.
Header Program Query Response
AVT AVT n AVT ? n
■ Value of n
The unit is number of points. Input an integer comprising 1 to 3 digits or OFF.
Data range: 2 ≤ n ≤ 1000, or OFF
■ Initial setting value
n is a backed up value.
■ Default
n = OFF
9.12 BKL [Back Light]
■ Function
Sets the time until the backlight turns off.
Header Program Query Response
BKL BKL n BKL ? n
■ Value of n
n is the time until the backlight is turned off. The unit is always min. Input a
value within the range of 0 to 20.
If 0 is input, the backlight will not turned off.
■ Initial setting value
n = 10 (min)
9.12 BKL [Back Light]
To Next Page
Loading...
Need help?
General
