9-35
9.26 DMD [Display Mode]
9.26 DMD [Display Mode]
■ Function
Sets a display mode.
Header Program Query Response
DMD DMD s
DMD 3, m, n
DMD ? s
3, m, n
■ • Value of s
s = NRM: Specify a normal display mode.
= NRMZ: Specify a normalize display mode.
= OVL: Specify an overlapping display mode.
= MHL: Specify a max. hold display mode.
= 3: Specify a 3-dimensional display mode.
• Values of m and n
m is a display type of the 3-dimensional display mode. Input 1, 2, or 3.
m = 1 : Type 1
2 : Type 2
3 : Type 3
n is a display angle of the 3-dimensional display mode. Input, 30, 45, 60, or 90.
(When 3 is input for the display type, only 45 can be input.)
■ Initial setting value
s = NRM
m, n is a backed up value.
■ Default
x = NRM (normal)
m = 1 (type), n = 45 (angle)
To Next Page
Loading...
Need help?
General
