Anritsu MS9710C - Page 225

Section 11 LabVIEW Measuring Instrument
11-8
Drivers for Front Panel Keys
Name corresponding to panel key or function Function
Light Output Off/On Turn on/off the optional light source.
Peak to Center Set the peak wavelength to the center wavelength.
Peak to REF Level Sets the peak level to the reference level.
Trace Marker to Center Set the trace marker to the center wavelength.
Sweep Start Start single/repeat sweep.
Sweep Stop Stop sweep.
Auto Measurement Start Start automatic measurement.
Printer Copy / Feed Copy/feed to the internal printer.
Markers
Card name ;Function key name Function
Marker ;Wl Marker Set/read a wavelength marker.
Marker ;Lvl Marker Set/read a level marker.
Marker ;Trace Marker Set/read a trace marker.
Marker ;Delta Marker Set/read a delta marker.
Marker ;Marker Erase Erase a marker.
Zone Markers
Card name ;Function key name Function
ZoneMarker ;Set / Erase Set/erase zone markers.
ZoneMarker ;Zone to Span Set the center and span of zone markers.
ZoneMarker ;Zoom Out/In Zoom in/out the zone markers.
Memory Data Read
Name corresponding to panel key or function Function
Read Memory Data Read memory data.
Initialization, Error Messages, etc.
Name corresponding to panel key or function Function
Initialize Start communication.
Close Terminate communication (for GPIB only)
Error Message Display error messages.
Error Message Japanese Display error messages (Japanese).
Reset Rest the MS9710C.