Anritsu MS9710C - Page 34

3-15
MS9710C Device Message List (8/13)
Function
Command
Data
request
Response
n, λ 1, L1, λ 2,
L2...
n, λ 1, L1, S1, d1,
λ 2, L2, S2, d2...
dx = "LEFT",
"RIGHT"
n, Rn, λ 1, SP1,
R λ 1, L1, RL1, λ
2, SP2, R λ 2, L2,
RL2...
n, λ 1, f1, L1, S1,
d1, SP1, SPf1, λ
2, f2, L2, S2, d2,
SP2, SPf2...
APR?
(analysis
results-
link
obtained)
Device message
Remarks
Applica
-tion
Result
WDM
n is the number of peaks,
λ x is the wavelength of peak
x,
Lx is the level of peak x.
When there is no peak,
n = 0.
n is the number of peaks,
λ x is the wavelength of peak x,
Lx is the level of peak x,
Sx is the SNR value for peak x,
dx indicates whether the dip
of peak x is left or right.
n is the number of peaks,
Rn is the reference peak
number,
λ x is the wavelength,
SPx is the spacing of peak x,
Rλx is the relative wavelength
of peak x,
Lx is the level of peak x,
R L x is relative level of peak x.
When there is no peak,
n = 0.
n is the number of peaks, λx
is the wavelength of the peak
x, fx is the frequency of the
peak x, Lx is the wavelength
of the peak x, Sx is the SNR
value for the peak x, dx is the
spacing of the peak x, and
Spfx is the spacing frequency
of the peak x.
9.5
3.3 Device Message List