General Information 1-7 Recommended Tools and Supplies
MS20xxC MM PN: 10580-00307 Rev. D 1-7
1-7 Recommended Tools and Supplies
• Castellated Socket with 1/4 inch hex drive – For Castellated (Slotted) BNC Connector Dress Nuts
• Anritsu Part Number T1451
• Hex driver handle – For Anritsu Part Number T1451
• Medium Phillips-head Screwdriver
• 7.5 lbf·in (0.85 N·m) Torque-Limiting Phillips-head Screwdriver
• Felo brand Series Nm adjustable torque screwdriver set, 0.6 N·m to 1.5 N·m
• Small Flat-Blade Screwdriver, with tip width of less than 3.5 mm – For Front Panel Keypad Bezels
• Small square of rubber or similar non-scratch material approximately 25 mm x 25 mm (1 in x 1 in) – For
Front Panel Keypad Bezels
• 5.5 mm Angled-Head Open End Wrench
• 5/16 inch (~8 mm) Open End Wrench, 2 each recommended – For SMA Connectors
• 5/16 inch and 8 lbf·in (0.9 N·m) Open End Torque Wrench – For Option 11
• Anritsu Model 01-201
• 7/16 inch (~12 mm) Nut Driver – For Rotary Encoder
• 3/4 inch and 12 lbf·in (1.35 N·m) Open End Torque Wrench, Anritsu Model 01-200
• Needle-Nose Pliers
• Small Cable Ties
• Scraper Tool – For removing RTV from connectors
• Room Temperature Vulcanizing (RTV) Silicon Sealant – For Keypad Flex PCB Replacement
Anritsu Part Number 3-783-1102
• Approved cleaning supplies – For LCD Display, Clear Plastic LCD Protector, and instrument Case
To Next Page
Loading...
