234 INDEX
serial communications, 10
timing output, 10
contact information, ii
copyright, v
cordsets
IED-320 power inlet connector, 12
crimp tool
RG-11, 22
digital drivers, 52
display
startup, 88
display modes
Position, 92
Time, 91
drive current vs. output voltage, 52
driver
analog, 52
digital, 52
elevation display, 93
event display indication, 89
event trapping, 62
arming, 62
fault indication
serial port, 66
fault modes, 90
firmware
updates, ii
front panel drawing, see panel drawing, front
fuses
replacing, 14
types and location, 14
handling
precautions, 1
IEC-320 connector, see Option, 07
initial clock time, 87
initial LED indication, 87
initial startup sequence, 87
inlet power, 12
IRIG-B
IEEE 1344 description, 54
initial indication, 90
modulated
voltage matching, 57
timecode description, 53
unmodulated, 53
waveform comparison, 53
IRIG-B Time code types, 53
issuance, ii
keys
description, 7
Down, 8
Enter, 8
Event/Deviation, 8
Position, 8
Setup, 8
Status, 8
Time, 8
Up, 8
latitude display, 92
LCD
display, 7
LED
annunciator
definitions, 6
status indicators, 7
longitude display, 92
mounting kit
antenna, 17
NTP Server, 169
NTP/PTP Server, 176
numeric data entry mode, 31
Option
08, terminals with SWC, 9
10, terminals with SWC, 9
power, 07, 12
power, 08, 13
power, 10, 13
Options List
Option 01, Backlight, 104
Option 02, Battery Backup, 105
Option 03, Four Additional Outputs, 106
Option 04, ON/OFF Switch, 110
Option 07, IEC-320 Power Inlet, 122
Option 08, 10 − 60 Vdc Power Inlet, 123
Option 10, 110 − 350 Vdc Power Inlet, 124
Option 19, Second RS-232 Port, 137
To Next Page
Loading...
Need help?
General