INDEX 235
Option 20, Single Fiber Optic Output, 138
Option 20A, Four Fiber Optic Outputs, 139
Option 23, COMTRADE Sample Rate Gen-
erator, 142
Option 27, 8-Channel High Drive, 149
Option 28, Power System Time, Frequency
and Phase Monitor, 154
Option 29, Four Outputs, Dry Contacts, 164
Option 32/33, NTP Server, 169
Option 34, NTP/PTP Server, 176
output signal
description, 53
panel
rear
description, 51
panels
drawing
front, 5
rear, 8
front, 5
rear, 5
position display modes, 92
datum, 93
power supply
voltage, 20
programmable pulse
description, 55
pulse width, 55
rack mount
mounting instructions, 2
rear panel, see panel, rear
RG-11
cable, 22
crimp tool, 22
ROM date, ii
serial command
antenna delay
set, 84
arm event trigger, 70
backlight auto, 77
backlight off, 76
backlight on, 77
broadcast ASCII + Quality, 67
broadcast ASCII Std, 65
broadcast Event Data, 66
broadcast Extended ASCII, 67
broadcast NMEA183 GLL, 68
broadcast NMEA183 ZDA, 69
broadcast Status, 66
broadcast strings, 65
broadcast Vorne Std, 65
broadcast Year + ASCII, 68
broadcast, interrogate, 65
clear event buffer, 70
clock offset
set, 84
Configure Option 23, 144
DST/Summertime
activate, 75
return settings, 75
start time, 75
stop time, 75
enable front panel, 76
Event
channel time, 69
return deviation, 70
Event number, 69
front panel, disable control panel, 76
Local Offset, 76
lock setup keys, 76
Opt28
commands, 159
Option 28
return System status, 160
return time, freq, dev, UTC, 163
set deviation, 162
set phase calibration, 162
set System time as Local, 160
set System time as UTC, 160
set voltage correction, 163
start Broadcast ASCII, 162
start Broadcast Vorne, 160
system frequency, 159
system frequency deviation, 159
system phase, 159
system time, 160
system time deviation, 159
out-of-lock alarm
set time, 84
Prog Pulse
To Next Page
Loading...
Need help?
General