236 INDEX
pulse polarity, 83
set pulse width, 82
set time mark, 83
Pulse Per Hour, 82
Return
display buffer, 84
elevation, 78
firmware version, 84
IP/MAC address, 86
latitude, 79
local date, 81
local time, 81
longitude, 79
UTC date, 81
UTC time, 81
Seconds per Pulse, 82
Set deviation operation, 69, 70
set elevation, 78
Set event operation, 70
set IEEE 1344 mode, 77
set latitude, 78
set local time, 77
set longitude, 78
set receiver time, 81
set UTC time, 77
Status
clock, 71
EEPROM, 72
receiver, 72
status of event/deviation, 71
survey, 73
system, 73
time quality, 74
survey mode, 80
serial port
output symbols, 64
pin definitions, 86, 99
Setup menu list, 30
signal
output
description, 53
SNTP, see NTP Server
startup sequence, 87
Statement of Compliance, 193
status display indication, 89
support
request, iii
synchronizing
multiple devices on one port, 56
time display modes, 91
timing outputs
description, 51
intro, 51
title page, v
unpacking the clock, 1
version
manual, v
warranty, iii
To Previous Page
Loading...
Need help?
General