Architect i2000SR - Page 62

i2000SR interface module Service Manual
Page 62 of 212 625798100.APS.5.doc
Figure 43 – Support Bracket Reference Tabs Align
Support Bracket Tabs [2]
are flush against the side
of the IM track [1].
The IM track [1] is
positioned vertically so
that the track top surface
is within the groove on
the support bracket tabs
[2].
Figure 44 - Differences between left ends of i200SR and IM
The difference between
the left end of the
i2000SR IM and i2000SR
frame [1] is 145 mm +/- 3
mm (5.75” +/- 0.125”)