Audi Q7 2007 Workshop Manual

Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
1 Removing and installing engine
9
6
– Remove air intake hose -arrows-.
– Unplug electrical connector -3-.
– Remove bolts -1- and -2- and detach throttle valve module
-J338- from intake connecting pipe.
Lay a cloth under the separating point to catch escaping hy-
draulic fluid.
– Clamp off hydraulic hose for power steering pump using a
hose clamp -3094-.
– Disconnect hydraulic hose -1- from power steering pump.
Disregard -item 2-.
To prevent damage to the refrigerant lines, ensure that the
pipes and hoses are not stretched, kinked or bent.
– Unplug electrical connector -2-.
– Remove retaining clips -1- and -5-.
– Disconnect refrigerant lines -3- and -4- from air conditioner
compressor.
Seal open pipes and connections at air conditioner compres-
sor with suitable caps (to prevent ingress of dirt and mois-
ture).
Note
Note
Note
Note
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259

Audi Q7 2007 Specifications

General

Brand	Audi
Model	Q7 2007
Category	Automobile
Language	English