Audi Q7 2007 !
6-cylinder TDI engine (3.0 ltr. 4-valve common rail), mechanics 01.2006
Repair Group 10 – Removing and installing engine
6
28
– Separate gearbox from engine and simultaneously detach
torque converter from drive plate -arrow-.
– Loosen clamping bolts -1- on sides of scissor-type assem-
bly platform -VAS 6131- and pull rear section of platform
together with gearbox slightly towards the rear to start
with.
– Secure the torque converter in the gearbox using support
bridge -30-211 A- to prevent it falling out.
更多资料请访问深度汽车论坛 http://shenduauto.com/ 客服QQ：1398556747 电话：18218750259
To Next Page
Loading...
Need help?
General
