AudioCodes MediaPack Series MP-11x

Version 6.6 605 MP-11x & MP-124
User's Manual 43. Configuration Parameters Reference
Parameter Description
[ \CallingNameMapIp2Tel ]
Note: For a detailed description of this table, see 'Configuring SIP
Calling Name Manipulation' on page 215.
Calling Name Manipulations Tel-to-IP Table
[CallingNameMapTel2Ip]
This table parameter configures rules for manipulating the calling
name (caller ID) for Tel-to-IP calls. This can include modifying or
removing the calling name.
[ CallingNameMapTel2Ip ]
FORMAT CallingNameMapTel2Ip_Index =
CallingNameMapTel2Ip_DestinationPrefix,
CallingNameMapTel2Ip_SourcePrefix,
CallingNameMapTel2Ip_CallingNamePrefix,
CallingNameMapTel2Ip_SrcTrunkGroupID,
CallingNameMapTel2Ip_SrcIPGroupID,
CallingNameMapTel2Ip_RemoveFromLeft,
CallingNameMapTel2Ip_RemoveFromRight,
CallingNameMapTel2Ip_LeaveFromRight,
CallingNameMapTel2Ip_Prefix2Add,
CallingNameMapTel2Ip_Suffix2Add;
[ \CallingNameMapTel2Ip ]
Note: For a detailed description of this table, see 'Configuring SIP
Calling Name Manipulation' on page 215.
Destination Phone Number Manipulation for IP-to-Tel Calls Table
Web: Destination Phone
Number Manipulation Table for
IP > Tel Calls
EMS: SIP Manipulations >
Destination IP to Telcom
[NumberMapIP2Tel]
This table parameter manipulates the destination number of IP-to-
Tel calls. The format of this parameter is as follows:
[NumberMapIp2Tel]
FORMAT NumberMapIp2Tel_Index =
NumberMapIp2Tel_DestinationPrefix,
NumberMapIp2Tel_SourcePrefix,
NumberMapIp2Tel_SourceAddress,
NumberMapIp2Tel_NumberType, NumberMapIp2Tel_NumberPlan,
NumberMapIp2Tel_RemoveFromLeft,
NumberMapIp2Tel_RemoveFromRight,
NumberMapIp2Tel_LeaveFromRight,
NumberMapIp2Tel_Prefix2Add, NumberMapIp2Tel_Suffix2Add,
NumberMapIp2Tel_IsPresentationRestricted;
[\NumberMapIp2Tel]
For example:
NumberMapIp2Tel 0 = 03,22,$$,$$,$$,2,667,$$,$$;
Note: For a detailed description of this table, see 'Configuring
Source/Destination Number Manipulation' on page 209.
EMS: Perform Additional
IP2TEL Destination
Manipulation
[PerformAdditionalIP2TELDes
tinationManipulation]
Enables additional destination number manipulation for IP-to-Tel
calls. The additional manipulation is done on the initially
manipulated destination number, and this additional rule is also
configured in the manipulation table (NumberMapIP2Tel
parameter). This enables you to configure only a few manipulation
rules for complex number manipulation requirements (that
generally require many rules).
 [0] = Disable (default)
 [1] = Enable