16-5
PPC Manual Revision 1
Chapter 16: Software Functional Overview
CAUTION
▪ Make sure the IR adapter is attached to the controller in a vertical orientation.
Communication is not possible if the IR adapter is attached in a slanting
position.
▪ Do not remove the cable while communicating, or it may aect the stability of
the operation system.
▪ Do not put PC in suspend or sleep mode while communicating, or the system
may fail to recover.
▪ The IR adapter and the cable are not waterproof. Do not use them in locations
that are likely to be exposed to splashes of water or other liquids.
▪ Keep the IR adapter optical communication interface clean.
Optical communication interface
Detach the IR adapter and the cable
1.
Move the upper part of the adapter
to the left or right to detach it.
2.
Stopper
To Next Page
Loading...
