17-9
PPC Manual Revision 1
Chapter 17: Software Setting Flow and Navigation
It is strongly recommended that settings and controller information be uploaded from the controller. To
create a file without uploading from a controller, use the settings in the table below. All other settings
should be left as the default “0” or “none” respectively.
Manual Setting Values
Controller Model Type 2 Type 3 Display Language Case Color
PPC5-1000 UT55A 0 0 1 1
PPC5-1001 UT55A 0 1 1 1
PPC5-1002 UT55A 0 2 1 1
PPC5-1100 UT55A 4 0 1 1
PPC5-1101 UT55A 4 1 1 1
PPC5-1102 UT55A 4 2 1 1
3.
Setting parameters
▪ For entering a set value: Click in a cell to enable entry, enter the desired set value,
then press the [Enter] key.
▪ For selecting a set value: Select it from a dropdown list.
▪ Entering a register symbol: Drag and drop register symbols from the Register
window. When register symbols have been entered, candidates are displayed in a
list; select a desired one from the list. It is also possible to register a register symbol
by entering a register number. Entering and accepting a register number causes
the indication to change to the register symbol.
The cell’ s background color is dierent, identifying it as a cell in which a register
symbol can be entered. To disable setting, enter “OFF” or “0” (zero).
A cell’ s column width can be increased or decreased by dragging the boundary line
between columns.
Icon Status
Status enabling a drop
Status disabling a drop
Set parameters in turn, starting at the top of the parameter menu tree. Clicking [NEXT] causes
To Next Page
Loading...
Need help?
General
