AVALEX TECHNOLOGIES AVR8414 User Manual

Page | 78 of 105
AVR8414 Operation Manual – Rev O
Table 8 – Messages by Event
ID
Event
On-Screen Display
(OSD) Message
Front Panel Message
44
Configuration import failed because the
configuration source storage device did not
contain a configuration file.
LOAD FAILED. ERROR:
<STORAGE DEVICE>
EMPTY
LOAD FAILED
45
Configuration import failed because the
configuration .ini file parse failed.
LOAD FAILED. ERROR:
<OFFENDING LINE IN
INI FILE>
LOAD FAILED
46
Record or reach-back was aborted because
of the source input video format changing.
<REC/RBK><#> ABORT,
VIDEO CHANGED
<REC/RBK><#> VIDEO
CHANGED
47
Record or reach-back was aborted because
of a SATA disk controller failure.
<REC/RBK><#> ABORT,
DISK FAIL
<REC/RBK><#> ABORT,
DISK FAIL
48
Record or reach-back was aborted because
the record storage device was removed.
<REC/RBK><#> ABORT,
DISK REMOVED
<REC/RBK><#> DISK
REMOVED
49
Record or reach-back was aborted because
the record storage device became
unavailable.
<REC/RBK><#> ABORT,
DISK REMOVED
<REC/RBK><#> DISK
REMOVED
50
Record or reach-back was aborted because
the record storage device became read
only.
<REC/RBK><#> ABORT,
DISK READ ONLY
<REC/RBK><#> DISK
READ ONLY
51
Record or reach-back was aborted because
the record storage device is full.
<REC/RBK><#> ABORT,
DISK FULL
<REC/RBK><#> ABORT,
DISK FULL
52
Record or reach-back start was aborted
because there is no source to record.
<REC/RBK><#> ABORT,
START NO SOURCE
<REC/RBK><#> START
NO SOURCE
53
Reach-back start was aborted because
there is no post-reach-back disk target.
RBK<#> ABORT, ETH
TARGET - NO
REACHBACK
RBK<#> ABORT, ETH
TARGET - NO
REACHBACK
54
Record or reach-back start was aborted
because there is no space on the target
storage device.
<REC/RBK><#> ABORT,
START NO SPACE
<REC/RBK><#> START
NO SPACE
55
Record or reach-back start was aborted
because the target storage device does not
exist.
<REC/RBK><#> ABORT,
START NO DISK
<REC/RBK><#> START
NO DISK
56
Record or reach-back start was aborted
because there is no video source.
<REC/RBK><#> ABORT,
START NO VIDEO
<REC/RBK><#> START
NO VIDEO
57
Record or reach-back start was aborted
because the CODEC bandwidth does not
have capacity.
<REC/RBK><#> ABORT,
START NO BANDWIDTH
<REC/RBK><#> NO
BANDWIDTH
58
Record or reach-back start was aborted
because the CODEC needs to be restarted
for this record video input, but the CODEC
cannot be restarted because it is in use (for
play or record).
<REC/RBK><#> FAIL!
STOP PLAY/REC AND
TRY AGAIN. CAPTURE
RECONFIG NEEDED
<REC/RBK><#> FAIL!
STOP PLAY/REC
59
Record or reach-back start failed at CODEC.
<REC/RBK><#> START
FAIL
<REC/RBK><#> START
FAIL

AVALEX TECHNOLOGIES AVR8414 Specifications

General

Brand	AVALEX TECHNOLOGIES
Model	AVR8414
Category	Measuring Instruments
Language	English