AVALEX TECHNOLOGIES AVR8414 - Page 95

Page | 94 of 105
AVR8414 Operation Manual – Rev O
Potentiometer
28V Max
Sets the maximum value expected
from the 28V dimming bus input (if
configured).
0 - 28000
28000
Recording
Encode
Decimate
Selects whether the AVR84xx
encoder will decimate 50/60 Hz
video to 25/30 Hz recordings to save
encoder bandwidth.
Yes, No
No
Reachback
Seconds
Selects the number of seconds the
AVR84xx will buffer using the
reachback recording feature.
30, 60, 180
30
Storage
Priority
Sets the default storage selection
priority that the DVR will use if the
primary media device is not present.
INT->SSD->SD-
>USB in any order
with highest
priority first
SD->SSD-
>INT->USB
Capacity
Warning
The AVR84xx will issue an on-screen
warning when the active media
device is filled to a designated
percentage.
15, 10 or 5 or 0
(disabled)
0
Noise Filter
Selects whether video will pass
through a noise filter prior to being
encoded.
Yes, No
No
Channel 1
Video Input
Selects with video input will be
recorded.
HD1, HD2, SD1,
SD2, SD3, SD4
None
Target
Selects the primary media for
recordings.
INT, SSD, SD,
USB, ETH
INT
Clone
Selects whether a second media will
record a duplicate copy of
recordings.
INT, SSD, SD,
USB, ETH, NONE
None
Overflow
Selects whether the overflow feature
is turned on; overflow will
automatically follow the storage
priority settings when the primary
media becomes full.
Yes, No
No