AVALEX TECHNOLOGIES AVR8414 - Page 96

Page | 95 of 105
AVR8414 Operation Manual – Rev O
Quality
Sets the maximum bit rate of the
video recording. The AVR84xx is
programmed with 4 bit rate options
shown in the table below:
Standard, medium,
high, ultra
* The Ultra High
setting for bit rate
is not allowed
when recordings to
USB due to the
data write speeds
required. Ultra is
only valid for
composite inputs if
only one input is
selected.
Standard
Recording
Start Trigger
Sets the method for starting a
recording; the AVR84xx can be
configured to begin recording using
a discrete input, to automatically
start recording upon system boot, or
when commanded by the user via
either the front panel or on-screen
menu.
Manual, turn-on,
discrete, discrete-
toggle
Manual
Channel 2
Video Input
Selects which video input will be
recorded.
HD1, HD2, SD1,
SD2, SD3, SD4
None
Target
Selects the primary media for
recordings.
INT, SSD, SD,
USB, ETH
INT
Clone
Selects whether a second media will
record a duplicate copy of
recordings.
INT, SSD, SD,
USB, ETH, NONE
None
Overflow
Selects whether the overflow feature
is turned on; overflow will
automatically follow the storage
priority settings when the primary
media becomes full.
Yes , No
No