Need help?Do you have a question about the Axia Element and is the answer not in the manual?
General| Brand | Axia |
|---|---|
| Model | Element |
| Category | Music Mixer |
| Language | English |
Covers caution, electrical, and ventilation warnings for safe operation.
Provides phone, email, and web details for customer assistance.
Information on submitting feedback and obtaining software updates.
Lists company trademarks and copyright information.
Details the terms and conditions of the product warranty.
Explains how to obtain factory service and authorized returns.
Overview of initial setup, network prep, and console requirements.
Guides through unpacking and preliminary setup of the Element console.
Details physical connections and IP address configuration for Element.
Provides steps for connecting and configuring the StudioEngine.
Configuration of StudioEngine channels.
Configuring the console's role.
Further configuration options.
Explains how to define audio source characteristics and modifiers.
Details creating and configuring source profiles via web interface.
Details setup for US and Euro modes of Telos phone systems.
Explains the function of GPIO ports for various device types.
Describes how to link GPIO ports with Source Profiles for control.
General discussion on GPIO port connections and limitations.
Details input connection requirements for GPIO ports.
Details output connection requirements for GPIO ports.
High-level explanation of Element's capabilities and interface.
Describes the Element's display and how it shows information.
Explains how to reconfigure the surface instantly for different shows.
Defines sources, channels, and faders within the Element system.
Details mix-minus setup and its automation by Element.
Explains GPIO integration for sources and their control.
Explains controls on the Monitor Module and SoftKnobs.
Information on Element's operating system and updates.
Overview of Element's major controls and their locations.
Details controls of the standard monitor module and its features.
Describes controls for the 2-fader phone module and associated features.
Explains meters, clocks, timers, and status annunciators on the main screen.
Covers controls for monitoring sources and making selections.
Explains common fader functions, displays, and output bus assignments.
Details accessing channel options and using talkback/preview functions.
Covers fader start vs. fader normal modes and their logic.
Describes how to answer, drop, and manage calls via the phone module.
Explains dialing out and using call control features.
Explains the three-band parametric EQ and its automatic bandwidth adjustment.
Details controls for sending audio to Aux buses and adjusting pan/balance.
Explains menu navigation and customizing individual fader behavior.
Describes selecting sources and accessing EQ/Dynamics settings.
Details how to adjust EQ frequencies, gain, and modes for different bands.
Explains Gate, Compressor, and De-Esser functions and settings.
Covers adjusting pan, balance, signal mode, and phase.
Explains settings for master send/return levels and assignments.
Covers setting fader modes (normal, start) globally.
Explains how to access and configure countdown and count-up timers.
Describes how to activate and use the record mode function.
Details operations for CR Operator, Producer, CR Guest, and Studio mics.
Explains handling of line sources and phone hybrid audio.
Details the handling of codec sources and recorder functions.
Lists and describes main outputs and auxiliary send/return buses.
Describes monitor outputs, inputs, and available source types.
Diagrams showing input/output interfaces and master output signal paths.
Diagrams illustrating auxiliary send/return and channel signal paths.
Diagrams for line input and various microphone channels.
Diagrams for phone, codec, and recorder channels.
Diagrams illustrating monitor output signal paths.
Answers common setup questions and network connectivity issues.
Guides on diagnosing modules and cleaning faders.
Guides installation and configuration for TWOx12 and 2101 phone systems.
Details installation for ISDN hybrids and GPIO control for One/Delta.
Describes connecting and operating legacy phone systems like ONE-x-Six.
Instructions for installing and connecting accessory panels.
Details configuring mic control and other accessory panels.
Provides worksheets for tracking IP addresses and channel IDs.
Specifies compliance with EU directives and standards for the Element.
Details testing performed for emissions, immunity, and safety.
Outlines the terms and conditions of the product warranty.
To Next Page
