baxter Hillrom Progressa - Page 18

Symbols
6 Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15)
Arrival Transport
Sequence—set the brakes
and plug in the bed (refer to
“Transport” on page 58).
Federal Communications
Commission (on the Wireless
Connectivity module) (refer
to “Wireless Connectivity”
on page 73).
Radio Equipment Directive
2014/53/EU on the Wireless
Connectivity module) (refer
to “Wireless Connectivity” on
page 73).
Wireless indicator (on the
Wireless Connectivity mod-
ule)—identifies the connec-
tion status of the wireless
module to the facility wire-
less network (refer to “Exter-
nal Wireless Module” on
page 74).
Location indicator (on the
Wireless Connectivity mod-
ule)—identifies the connec-
tion status of the Location
feature (refer to “External
Wireless Module” on
page 74).
Connected indicator (on the
Wireless Connectivity mod-
ule)—identifies the connec-
tion status of the wireless
module to SmartSync Sys-
tem (refer to “External Wire-
less Module” on page 74).
Product complies with RoHS
2 Directive 2011/65/EU
Warning: California prop 65
label
This symbol is a sign of con-
firmation of compliance with
the regulations of the Eur-
asian Customs Union.
Complies with Australian
and New Zealand radio com-
munications requirements
Complies with Oman radio
communications
requirements
Complies with Morocco
radio communications
requirements
Complies with Brazil radio
communications
requirements
Complies with United Arab
Emirates radio
communications
requirements
Siderail Symbols
Lockout control—Lock out
articulation controls or the
GCI screen (refer to “Lockout
Controls” on page 14).
Bed Up and Down control
(refer to “Bed Up/Down” on
page 15).
Control lockout—comes on
when a bed articulation con-
trol is locked out. Located
next to the articulation con-
trol.
Knee Up and Down control
(refer to “Knee Up/Down” on
page 16).
Symbol Description Symbol Description
p