Surfaces
84 Hillrom Progressa ICU Hospital Bed Instructions for Use (171528 REV 15)
Turn Assist
To Turn On the Sleep Mode
1. Press the Surface menu control on the GCI screen.
2. Press Sleep Mode.
To Turn Off the Sleep Mode
1. Press the Surface menu control on the GCI screen.
2. Press Normal.
The Turn Assist mode will inflate the surface assisting the caregiver to turn the patient for linen
changes, dressing changes, bed pan placement, back care, and other nursing procedures. Pressing
Right Turn Assist will turn the patient to the patient's right side.
For enhanced posterior patient access, Max-Inflate/P-Max Inflate may be used once the patient has
been turned to the desired side.
The siderail the patient is turning towards MUST be in the up position to activate turn assist. If the
siderail is down, a triple beep will sound and a message will appear on the GCI screen indicating the rail
must be up to initiate. Once the patient has started to turn, the siderail the patient is turning away from
can be lowered for easier patient access. Three beeps will sound as a safety alert, and a message will
appear on the GCI screen when the siderail is lowered.
To Activate
1. Press the Surface menu control on the GCI screen.
To Next Page
Loading...
Need help?
General
