40 pro+ Surface Instruction for Use (209196 REV 8)
VERSACARE Bed—pro+ Surface Installation Instructions
The surface power cord has magnets installed on the cord. The power
cord is routed along the patient-left side of the bed to the head end of
the bed. Below is an overall view of the cord routing; the numbered
detail views correlate with Step 12 through Step 16 that follow.
Surface Power Cord Routing (P3255A01, P3255A02, and
P3255A05)
12. Route the surface power cord
between the head and seat
sections on the left-side of the bed.
To Next Page
Loading...
