55
3
Running Samples
This chapter describes how to set up for plate-based acquisition and acquire
samples using the BD High Throughput Sampler. For general information about
the software, see Chapter 2.
! Tip If you are running the system for the first time, BD Biosciences recommends
that you practice running a sample plate using BD Calibrite™ beads or a similar
control sample.
The following topics are covered in this chapter:
• Starting Up on page 56
• Creating Experiments on page 64
• Preparing for Acquisition on page 78
• Performing Compensation on page 81
• Acquiring Data on page 82
• Analyzing Data on page 86
• Maintaining Data on page 93
• Returning to Tube-Based Acquisition on page 94
To Next Page
