170 BD High Throughput Sampler User’s Guide
3 While keeping your spine in a natural position and your head up, lift the
object using the force of your legs.
Do not twist your back when lifting; pivot on your heels.
Unpacking the HTS Unit
1 With the arrows on the box pointing up, open the shipping container.
Remember to save all paperwork and shipping materials to repack the unit
to be returned.
2 Remove the top piece of foam and set it aside.
3 Using proper lifting techniques, carefully lift the unit out of the container
and place it on a table near the cytometer.
4 Remove the HTS unit from the plastic bag.
5 Remove the small I-shaped piece of foam that secures the HTS probe
assembly and plate holder and set it aside.
Installing the HTS Unit
Follow this procedure to install your replacement HTS unit.
1 To avoid damaging the HTS probe:
The unit is encased in plastic to protect it during shipment. The plastic can
make the cytometer slippery and difficult to grasp. To prevent personal
injury or damage to the cytometer, use caution when lifting the cytometer
out of the container.
Any cytometer surface that comes in contact with biological specimens can
transmit potentially fatal disease. Use universal precautions when handling
cytometer hardware. Wear suitable protective clothing and gloves.
To Next Page
Loading...
