Chapter 4: Maintenance 129
Replacing the Probe
The probe is located at the end of the probe assembly arm. Replace the probe
whenever it is bent or permanently clogged. A spare probe is included in the
accessory kit.
Figure 4-14 Probe assembly components
1 Unscrew the fitting at the top of the probe (Figure 4-14).
2 Remove the probe by unscrewing it from the arm.
3 Install a new probe.
4 Reattach the fitting at the top of the probe.
All cytometer surfaces and hardware that come in contact with biological
specimens can transmit potentially fatal disease. Use universal precautions
when replacing the probe. Wear suitable protective clothing, eyewear, and
gloves.
probe
fitting
arm
To Next Page
Loading...
