System Error Codes | 199
Code Message What to do
810A No request running when
response request issued
Contact BioTek TAC.
810C Response for outstanding
request not ready yet
Contact BioTek TAC.
810D To communicate with the LHC,
the instrument must be at its
Home screen
The LHC can only talk to the instrument
when its main menu is displayed. When the
instrument is busy, for example when
AutoPrime is running, press the Stop button
on the keypad, if desired, to end the current
process and return to the main menu.
810E One or more request
parameters are not valid
Contact BioTek TAC.
810F The command was received
while the software was not
ready to accept that command
Contact BioTek TAC.
A00 Invalid plate type requested Service Only.
Contact BioTek TAC.
A100 -
A10F
Software device not available Service Only.
Contact BioTek TAC.
A200 Version strings for multiple
microprocessors do not match
Service Only.
Contact BioTek TAC.
A301 +5v logic power supply level
error
Service Only.
Contact BioTek TAC.
A302 +24v system/motor power
supply level error
Service Only.
Contact BioTek TAC.
A400 Malloc failed Service Only.
Contact BioTek TAC.
A500 Multiple tasks attempted to use
display simultaneously
Service Only.
Contact BioTek TAC.
A600 Serial EEPROM access error Service Only.
Contact BioTek TAC.
A700 Motor truncation error Service Only.
Contact BioTek TAC.
BioTek Instruments, Inc.
To Next Page
Loading...
