14 | Chapter 2: Installation
Unpack and Inspect the Instrument
Important: Save all packaging materials. If you need to ship the instrument or
accessories to BioTek for repair or replacement, you must use the original packaging.
Using other forms of commercially available packaging is not recommended and can void
the warranty. Improper packaging that results in damage to the instrument may lead to
additional charges. Refer to the operator's manual for repacking instructions.
Inspect the shipping box, packaging, instrument, and accessories for signs of
damage.
If the 405™ Microplate Washer LS is damaged, notify the carrier and your BioTek
representative. Keep the shipping cartons and packing material for the carrier’s
inspection. BioTek will arrange for repair or replacement of your instrument
immediately, before the shipping-related claim is settled.
1. Unpack the boxes containing the instrument and other equipment:
l 405™ Microplate Washer LS and accessories
l Vacuum Pump and accessories
l Vacuum Filtration Accessory Kit
2. Place all packing materials back into the shipping boxes for reuse if necessary.
Refer to the Package Contents on page 5 to make sure you have all expected
equipment.
Remove the Shipping Hardware
The 405 LS is shipped with a protective manifold shipping bracket. Remove this
bracket before using the washer and reinstall it prior to shipping to avoid
irreparable damage to the manifold. Failure to remove and reinstall the shipping
bracket may void your warranty.
Keep in mind that you must reinstall the shipping hardware and use the original
shipping material if it is necessary to return the instrument to BioTek for service or
repair.
405™ Microplate Washer LS
To Next Page
Loading...
