Optimize Performance | 41
Running Predefined Protocols
BioTek provides numerous predefined protocols for maintaining the instrument
in top condition and for qualifying its performance. Review the Predefined
Protocols on page 43.
To run a defined protocol:
LHC Keypad
1.
Select Open and locate
the 405 LS folder.
2. Open the 405 LS folder.
Find the desired protocol
for your instrument model.
Important: Be sure to Customize
the Predefined Protocols below
1. At the main menu, press RUN.
2. Press Options to scroll to the desired
protocol or use the arrow and number
keys to enter its number.
3. Press ENTER and follow the prompts.
Creating Protocols: Washing, Aspirating and Dispensing Fluid
In addition to the quick routines available from the keypad’s main menu, you can
define and run protocols. Protocols offer more parameters, giving you the ability to
fine-tune instrument performance, and perform more complex processing.
Keypad Control
Find instructions for creating and modifying protocols using the keypad
beginning page 48.
Liquid Handling Control™ (LHC) Software
Launch the LHC software to create or modify protocols, see page 54
Select Help>Help Topics to learn about the LHC.
LHC Users Only: Customize the Predefined Protocols
BioTek provides predefined protocols for maintenance routines and instrument
qualification tests. You can quickly customize the protocols for regular use.
BioTek Instruments, Inc.
To Next Page
Loading...