Repacking the 405 Washer | 33
3. "Q" models only: Install the second,
smaller bracket which covers the
sensor on the side of the Verify unit.
Then, proceed with the regular
repacking instructions.
4. Install the manifold shipping bracket.
"Q" models: secure the manifold
bracket to the Verify unit bracket.
5. Remove the plate carrier and put it in
the accessories box.
6. 405 Touch: Tape the cardboard
protector on top of the touch screen.
Obtain an RMA number:
l Contact BioTek TAC to obtain a Return Materials Authorization number,
l Write "RMA" on the shipping box in large, clear letters,
l And, include the RMA number in the shipping address label:
BioTek Instruments, Inc.
ATTN: RMA# xxxxx
15 Tigan Street
Winooski, Vermont 05404 USA
BioTek Instruments, Inc.
To Next Page
Loading...
