BLEMO ER24 Series - Page 167

Configuration Mode (ConF)
169
Code Nam e / De s cription Adjustment range Factory s e tting
dA3 [Subtract. ref. 3]
[No] (nO)
Selection of a reference to be subtracted from [Ref.1 channe l] (Fr1) or [Ref.1B channe l] (Fr1b).
Identical to [Sum m ing ref. 2] (SA2) page 168.
MA2 [Multiplier ref. 2]
[No] (nO)
Selection of a multiplier reference [Ref.1 channe l] (Fr1) or [Ref.1B channel] (Fr1b).
Identical to [Sum m ing ref. 2] (SA2) page 168.
MA3 [Multiplier ref. 3]
[No] (nO)
Selection of a multiplier reference [Ref.1 channe l] (Fr1) or [Ref.1B channel] (Fr1b).
Identical to [Sum m ing ref. 2] (SA2) page 168.
Parameters described in this page can be accessed by:
DRI- > CONF > FULL > FUN- > OAI-