Configuration Mode (ConF)
DYN CURRENT LIMIT
The DTM ER24, is available w ith SoMove to set the
BM P
motors. To install the ER24 DTM (device type manager), you can
dow nload and install our FDT (field device tool): SoMove lite on ww w.blemo.com.
Σ
I²t
Current
Current
limitation
Code Nam e / De s cription Adjustment range Factory s e tting
I2tA
*
nO
YES
[I²t model activation]
[No]
(nO)
I²t model activation for current limitation
[No]
(nO):
[Ye s ]
(YES):
w hen i²t
u
Max
Σ
i²t,
[I²t ove rload leve l]
(
I2tM
)
= 100 and current limitation is set to InMotor
when
i²t
y
Max
Σ
i²t*90%,
[
I²t ove rload level]
(
I2t
M
)
y
90
and
the
current
limitation
is
set
to
CLI
This
paramet er
can
be
accessed
if
[max
time
of
I²tl]
(
I2tt
)
is
not
set
to
[0.00
]
(
0.00
)
I2tI
[max current of I²tl]
1.5 In +1 (1)
Maximum current of I²t model.
I2tt
[max time of I²tl]
0.00 to 655.35
[0.00 ]
(0.00)
Maximum time of I²t model.
(1) In corresponds to the rated drive current indicated in the Installation manual or on the drive nameplate.
These parameters only appear if the corresponding function has been selected in another menu. When the parameters can
also be accessed and adjusted from w ithin the configuration menu for the corresponding function, their description is detailed
in these menus, on the pages indicated, to aid programming.
[I²t overload level]
90%*max
I²t
*
To Next Page
Loading...
