BLEMO ER24 Series - Page 310

Diagnostics and Troubleshooting
310
De te cte d Fault Nam e Probable cause Re m edy
SOF
[Ove rspeed]
•
Instability or driving load too
high.
•
Check the motor, gain and
stability
parameters.
• Add a braking resistor.
• Check the size of the motor/drive/load.
• Check the parameters settings for the
[FREQUENCY METER] (FqF-) function page 266, if it is
configured.
SPF
[Spe e d fdback
loss]
• Signal on "Pulse input" missing, if the
input is used for speed measurement.
• Encoder feedback signal missing
• Check the w iring of the input cable and the detector used.
• Check the configuration parameters of the encoder.
• Check the w iring between the encoder and the drive.
• Check the encoder.