WARNING!
Risk of serious injuries caused by liquid spouting out or
escaping gases!
Gases or liquids may escape uncontrollably from seals and screw
connections. Especially when flange connections are released
and maintenance openings are opened, pressurized liquid can
spout out at the cover.
Never loosen connections when the unit is pressurized.
— Ensure that all valves and shut-off devices on the inlet and
outlet are closed.
— Release the pressure and empty the Börger machine via a
drainage device (if available).
— Collect any leakage of medium by suitable means and dis-
pose of it in accordance with the applicable local guidelines.
— Therefore, wear your personal protective equipment (PPE)
Ä
Chapter 2.6 “Personal protective equipment” on page 25
when opening the cover and take all necessary precautions.
CAUTION!
Risk of burns!
Particularly when used outside at correspondingly high ambient
temperatures and high medium temperatures, individual parts of
the Börger machine can become hot and should not be touched
during operation.
Stop the feed and shut down the Börger machine prior to any
troubleshooting, maintenance and repair work on the Börger
machine and the accessories.
Allow the system to cool down completely, if necessary, before
carrying out troubleshooting, maintenance and repair work.
Avoid dust formation as this contributes to heat build-up.
Safety
BA-RC40_EN, 17.01.2024www.boerger.de / www.boerger.com20
To Next Page
Loading...