WARNING!
Ignition hazard due to frictional heat!
The separator may only be run dry, i.e. without being fed any sub-
strate, for short periods of time.
The frictional heat that develops at the Multi Disc could ignite dry
residues of substrate.
Provide appropriate monitoring devices.
NOTICE!
Risk of severe material damage due to a delayed shut-down
in the event of a malfunction!
A delayed shut-down in the event of malfunction can cause per-
manent damage to the Börger machine.
— In the event of a malfunction, shut down the Börger machine
and all upstream and downstream system components imme-
diately until the cause has been rectified.
NOTICE!
Risk of damage caused by frost!
Frost can cause damage to the Börger machine.
— Protect the Börger machine and its connections against frost.
Safety
BA-RC40_EN, 17.01.2024 www.boerger.de / www.boerger.com 39
To Next Page
Loading...