NOTICE!
Risk of material damage due to impermissible changes to
limit values.
The settings at the evaluation units or at the frequency converter
must not be changed. Non-compliance may lead to material
damage.
NOTE!
Presettings of parameters
Unit-specific values, limits as well as variable parameters are
preset by factory default according to the order specifications for
the particular case.
NOTE!
When using frequency converters
Due to their working principle, frequency converters generate
leakage current.
— For proper operation of a frequency converter at a residual
current device, the use of an AC/DC sensitive residuaI cur-
rent device (type B) according to EN50178/VDE0160 is
required due to the DC component of the leakage current.
Further operating manuals / supplementary operating manuals
You must completely read the separate operating manuals and/or supplemen-
tary operating manuals for components and/or special versions.
Pay particular attention to all instructions
— on safety,
— on operation and control,
— on repairs and maintenance.
Safety
BA-RC40_EN, 17.01.2024 www.boerger.de / www.boerger.com 41
To Next Page
Loading...