BT REFLEX RR B2-3CC - 12.4 Bearing replacement; 12.4.1 Dismantling; 12.4.2 N-side; D-side

T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
12- 4 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Electric drive motor – 1760
Bearing replacement
12.4 Bearing replacement
12.4.1 Dismantling
12.4.2 N-side
• Loosen the stud screws (20) using tool 08-15444.
• Remove the screws (34).
• Remove the shield (3).
• Remove the circlip (16) and support ring (18).
• Pull off the bearing (5) with a gear puller.
D-side
• Remove the circlip (26) from the bearing housing.
• Pull off the bearing housing (29) with a gear puller.
• Pull the bearing (28) off from the bearing housing with a Kukko ball
bearing puller.
• Remove the seal (30) if it leaks.
21 2072627 28 29 30
2
11
12 1041922
24
23
25
8
34
3386
33
1617 185
50
14
31
5154
55
D
https://www.forkliftpdfmanuals.com/