T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
45- 2 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Instructions for destruction
Abbreviations
45.3 Abbreviations
The following abbreviations for Service Manuals and plastic materials
are used in the dismantling instructions. Abbreviations used are:
SM = Service Manual
PE = Polyethene
PP = Polypropylene
PUR = Polyurethane
PVC = Polyvinyl chloride
PC = Polycarbonate
PMMA = Plexiglass
ABS = Acrylonitrile-butadiene-styrene
45.4 Sorting
The sorting method for component parts is based on how you can recy-
cle the parts and whether they must be taken care of in a special way.
• Plastics must first and foremost be sorted into recyclable and
non
-recy-
clable plastics. Plastics that can be recycled must be subdivided to differ-
entiate between the different types of plastics. Instructions either denote
in which container the plastic should be placed or there is a reference to
the material marking on the plastic component. In those cases where it is
stated in which container the plastic part should be placed, this is done
by stating the abbreviation for the plastic in question.
Sorting is not necessary for non-recyclable plastics. These are placed in
the container intended for combustible material.
• Iron and steel scrap is sorted separately.
• Composite scrap that is difficult to dismantle and which contains dif-
ferent metals such as steel, aluminium, copper and other materials,
e.g. plastics, should be sorted separately.
• Oil is collected in the intended container.
• Oil filters are collected in the intended container.
• Parts contaminated by oil, such as hydraulic hoses and tanks,
should be sorted separately.
• Batteries should be returned to the manufacturer, either directly to
the manufacturer or through BT.
• Electronic scrap should be sorted from other scrap.
• Cables should be removed and collected separately.
• Small parts such as screws, bolts, nuts, washers, etc. are not includ-
ed in the dismantling instructions. These should be placed in the
container intended for iron and steel scrap.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...