BT REFLEX RR B2-3CC - 41.7.1 Description of the display symbols

T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
41- 8 Service Manual REFLEX RR B,E RR B,E CC © BT Europe AB
Positioning equipment – 9390
Display
41.7.1 Description of the display symbols
Symbol Function
Numerical push-buttons for setting height levels
To control the required height level while driving
STOP
Deletes incorrectly entered height levels in auto-
matic mode, stops programming and removes
stops due to error
Save “LEAVE level” when programming
Save “COLLECT level” when programming
LOAD
Push-button to indicate that there is a load on the
forks when starting
Push-button to access programming routines
Display window to indicate height levels and error
codes
0
9
INFO
PROG
https://www.forkliftpdfmanuals.com/