T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
29- 2 Service Manual REFLEX RR B/E, RR B/E CC © BT Europe AB
Mast mounted hose reel – 6370
Check after assembly
29.3 Check after assembly
When the hose reel is first used lift the forks to the maximum lift height.
Check that the hose and hose drum work correctly and count the
number of turns that the hose drum rotates.
The total of the number of turns made by hand when preloading and the
number of turns for maximum extract must be 10 at most.
Turns with preloading + operating turns = max 10
NOTE:
The hose must not be fully unwound from the hose drum at maximum
lifting height. At least
¼ turn of hose must remain on the hose drum.
Make sure that the hose drum can still be turned by hand with the hose
fully extracted. The hose drum must not lock up.
Check that the hose rewinds correctly when the forks are lowered. The
hose must always be loaded otherwise there is a risk of the hose sliding
over the side plates. If this is the case adjust the preloading tension.
NOTE:
The spring-loaded eye must face the hose’s direction of unwinding.
Spare parts must correspond with the manufacturer’s defined technical
specifications. This demand is always met when using original spare
parts.
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...