Valid from serial number T-code
713962- 403-414, 669-671, 716-718
Order number Date
218920-040 2005-06-01
© BT Europe AB Service Manual REFLEX RR B,E RR B,E CC 9- 3
Driver protection – 0840
Tilt Stops
9.2.2 Removing the tilt stops
Some tilt stops can be removed. Carefully follow the observations in the
table below.
The table relates to 900 mm support arm width. Trucks with a greater
support arm width normally have no tilt stops.
Truck Lift height Comments
RR B/E 1-2 Not equipped with tilt stops
RR B/E3 -max lift height The tilt stops must not be removed
RR B/E4 -max lift height The tilt stops must not be removed
RR B/E5-6 -7,000 mm
Over 7,000 mm
The tilt stops can be removed
The tilt stops must not be removed
RR B/E7 -7,000 mm
Over 7,000 mm
The tilt stops can be removed
The tilt stops must not be removed
RR B/E8 -8,000 mm
Over 8,000 mm
The tilt stops can be removed
The tilt stops must not be removed
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...