T-code Valid from serial number
403-414, 669-671, 716-718 713962-
Date Order number
2005-06-01 218920-040
42- 22 Service Manual REFLEX RR B,E RR B,E CC © BT Europe AB
TV equipment – 9390
Camera mounted on fork
42.2.3 Voltage converter A10
A10 converts incoming voltage 48 V into 12 V, which is fed to the TV
monitor and camera.
The converter is protected on the input side against polarity variation,
short circuits and thermal overload.
The chassis is not live, and the in/outputs are galvanically separated.
For further information, see Wiring diagram C code 5000.
Parameter Setting Unit Description
Input voltage 48 Volt
Output voltage 13.2 Volt
Max. operating volt-
age
64 Volt
Min. operating voltage 40 Volt
Max. continuous cur-
rent
6 Amp
Max. intermittent cur-
rent
8 Amp
Fuse on input 6.3 Amp
https://www.forkliftpdfmanuals.com/
To Next Page
Loading...